09G2S ( 09Г2С )
09G2S Steel Pipes & Tubes Supplier in India — Russian Metals
INTRODUCTION OF 09G2S
Russian Metals stocks and exports 09G2S in pipes, tubes, plates, sheets, beams, channels, and structural sections suitable for high-strength welded structures. Our 09G2S material is sourced from reliable mills and delivered with ISO-aligned quality assurance, full heat-number traceability, and complete test documentation (chemical, mechanical, and impact toughness). We supply global buyers in infrastructure, bridges, heavy machinery, rolling stock, oil & gas projects, fabrication shops, pressure equipment, steel construction, and EPC contractors who require dependable 09G2S structural steel with strong weldability, low-temperature performance, and consistent mechanical properties
| Grade : | 09G2S ( 09Г2С ) |
| Substitute: | 09Г2, 09Г2ДТ, 09Г2Т,10Г2С |
| Classification : | Structural steel for welding construct |
| Equivalent grades: | Go here |
Why Choose 09G2S from Russian Metals?
Certified quality: MTC EN 10204 3.1, lot traceability
Weld-friendly: designed for welded structures; low crack sensitivity
Processing: cut-to-length, beveling, CNC profiling, blasting/priming
Global delivery: sea-worthy packing, markings, export docs
Chemical composition in % for grade 09G2S ( 09Г2С )
| C | Si | Mn | Ni | S | P | Cr | V | N | Cu | As |
|---|---|---|---|---|---|---|---|---|---|---|
| max 0.12 | 0.5 - 0.8 | 1.3 - 1.7 | max 0.3 | max 0.035 | max 0.03 | max 0.3 | max 0.12 | max 0.008 | max 0.3 | max 0.08 |
Typical Chemical Composition (Wt. %) — Buyer Guidance
(Indicative; heat certificate prevails.)
C ≤0.12 • Si 0.50–0.80 • Mn 1.30–1.70 • Ni ≤0.30 • Cr ≤0.30 • Cu ≤0.30 • P ≤0.030 • S ≤0.035 • V ≤0.12 • N ≤0.008 • As ≤0.08 • Fe balance
Typical Mechanical Properties (Room Temperature*)
Sheets/Plates: UTS ~430–490 MPa, YS ~265–345 MPa, El ~21%
Pipes (ERW): UTS ~490 MPa, YS ~343 MPa, El ~20%
*Actual values depend on thickness and standard/delivery condition.
Weldability & Fabrication
Welding:
No restrictions with qualified procedures; preheat/interpass set by section thickness and ambient temperature.
Forming/Machining:
Good cold-formability; standard machining with coolant and sharp tooling.
Surface Protection:
Blasting/priming, galvanizing or coating recommended for aggressive atmospheres.
Product Forms & Supply Range
Pipes & Tubes: ERW/SAW; beveled ends, hydrotest on request
Plates/Sheets/Coils: Mill or shot-blasted/primed (Sa 2.5)
Sections: beams, channels, angles, hollow sections
Cut Parts: CNC plasma/oxyfuel/laser per DXF/STEP
Applications of 09G2S Structural Steel
Infrastructure & Buildings:
Trusses, purlins, bracings, bridge members
Transportation:
Wagon centersills, sheathing, flange beams
Oil & Gas / Utilities:
Supports, pipe racks, low-temp service fabrications
Equivalent Grades & Cross-References
(Verify by spec and condition before substitution.)
DIN/EN: 13Mn6 (nearest)
JIS: SB49
GB (China): 12Mn
CIS: 09G2, 09G2DT, 09G2T, 10G2S (related)
Temperature of critical points for grade 09G2S ( 09Г2С ).
| Ac1 = 725 , Ac3(Acm) = 860 , Ar3(Arcm) = 780 , Ar1 = 625 |
Mechanical properties under Т=20oС for grade 08KH18N10T ( 08Х18Н10Т )
| Assortment | Dimension | Direct. | σB | σT | δ5 | ψ | KCU | Heat treatment |
|---|---|---|---|---|---|---|---|---|
| - | (mm) | - | MPa | MPa | % | % | kJ/m² | - |
| Sheet, GOST 5520-79 | 430-490 | 265-345 | 21 | 590-640 | ||||
| Pipe, GOST 10705-80 | 490 | 343 | 20 | |||||
| Bars | to 250 | 430 | 265 | 21 | , |
Why Fabricators Prefer 09G2S
Consistent toughness for cooler climates and field welding
Stable properties across thickness ranges
Reliable weld performance minimizing HAZ cracking risks
Quality, Testing & Documents
Tests: PMI, UT (plates/welds), impact testing (as required), hardness
Docs: MTC 3.1, dimensional reports, packing lists; third-party inspection (BV/DNV/LR/TÜV) on request
Technological properties for grade 08KH18N10T ( 08Х18Н10Т )
| Weldability : | without limitations. |
| Flakes : | not predisposed |
| Temper brittleness: | not predisposed |
Physical properties for grade 09G2S ( 09Г2С )
| T | E 10- 5 | α 10⁶ | λ | ρ | C | R 10⁹ |
|---|---|---|---|---|---|---|
| Grade | MPa | 1/Grade | Watt/(m·Grade) | kg/m3 | J/(kg·Grade) | Ohm·m |
| 20 | ||||||
| 100 | 11.4 | |||||
| 200 | 12.2 | |||||
| 300 | 12.6 | |||||
| 400 | 13.2 | |||||
| 500 | 13.8 | |||||
| T | E 10- 5 | α 10⁶ | λ | ρ | C | R 10⁹ |
Equivalent steels for grade 08KH18N10T ( 08Х18Н10Т )
Warning! Indicated both exact and nearest equivalents.
| Germany | Japan | China | Bulgaria | Hungary | Romania |
|---|---|---|---|---|---|
| DIN,WNr | JIS | GB | BDS | MSZ | STAS |
| 13Mn6 9MnSi5 | SB49 | 12Mn | 09G2S | VH2 | 9SiMn16 |
Types of delivery of grade 09G2S ( 09Г2С )
- В22 - Graded and shaped rolling
- B23 - Sheets and Strips
- B33 - Sheets and Strips
- В62 - Steel pipes and connecting parts to them
Specification
Mechanical properties :
σB - Tensile strength [MPa]
σT - Yield stress [MPa]
δ5 - Specific elongation at fracture [%]
ψ - Reduction of area [%]
KCU - Impact strength [kJ/m²]
HB - Brinell hardness [MPa]
Physical properties :
T - Test temperature [Grade]
E - Young modulus [MPa]
α - Coefficient of linear expansion (20° - T) [1/Grade]
λ - Thermal (heat) condition coefficient [Watt/(m·Grade)]
ρ - Density [kg/m³]
C - Specific heat (range 20° - T) [J/(kg·Grade)]
R - Electrical resistance [Ohm·m]
Weldability :
without limitations - welding is done without heating and subsequent heat treeting
limited weldability - welding is possible under heating up to 100-120 grade and subsequent heat treeting
hard weldability - obtaining the quality welding needs the additional operations:heating up to 200-300 grade; the heat treeting ia annealing