- Flat 20, Reynolds USA
- +812 555 33 44
Mon - Fri: 9:00 - 19:00
Russian Metals
B65
Characteristics for grade V65 ( В65 )
| Grade : | V65 ( В65 ) ( 1165 ) |
| Classification : | Aluminium wrought alloys |
| Equivalent grades: | Is absent |
Chemical composition in % for grade V65 ( B65 )
| Fe | Si | Mn | Ti | Al | Cu | Mg | Zn | Impurity |
|---|---|---|---|---|---|---|---|---|
| max 0.2 | max 0.25 | 0.3 - 0.5 | max 0.1 | 93.65 - 95.65 | 3.9 - 4.5 | 0.15 - 0.3 | max 0.1 | other, each 0.05; all 0.1 |
Comment: Al is a basis; the percentage of Al is given approximately.
Physical properties for grade V65 ( B65 )
| T | E 10⁵ | α 10⁶ | l | r | C | R 10⁹ |
|---|---|---|---|---|---|---|
| Grade | MPa | 1/Grade | Watt/(m·Grade) | kg/m³ | J/(kg·Grade) | Ohm·m |
| 20 | 2800 | 50.4 | ||||
| 100 | 155 | 964 |
Types of delivery of grade V65 ( В65 )
B74 - Wire made of non-ferrous metals and their alloys
Specification:
Mechanical properties:
- sB - Tensile strength, [MPa]
- sT - Yield stress, [MPa]
- d5 - Specific elongation at fracture, [%]
- y - Reduction of area, [%]
- KCU - Impact strength, [kJ / m²]
- HB - Brinell hardness, [MPa]
Physical properties:
- T - Test temperature, [Grade]
- E - Young modulus, [MPa]
- a - Coefficient of linear expansion (range 20° - T), [1/Grade]
- l - Thermal (heat) condition coefficient, [Watt/(m·Grade)]
- r - Density, [kg/m³]
- C - Specific heat (range 20° - T), [J/(kg·Grade)]
- R - Electrical resistance, [Ohm·m]
V65 ( B65 ) - Aluminium wrought alloys: chemical composition, mechanical and physical properties, hardness
Database of steels and alloys (Marochnik) contains information about chemical composition and properties of more than 3000 steels and alloys.