- Flat 20, Reynolds USA
- +812 555 33 44
Mon - Fri: 9:00 - 19:00
Russian Metals
B95
Characteristics for grade V95 ( B95 )
| Grade : | V95 ( В95 ) ( 1950 ) |
| Classification : | Aluminium wrought alloys |
| Equivalent grades: | Go here |
Chemical Composition in % for Grade V95 (B95)
| Fe | Si | Mn | Ni | Cr | Ti | Al | Cu | Mg | Zn | Impurity |
|---|---|---|---|---|---|---|---|---|---|---|
| max 0.5 | max 0.5 | 0.2 - 0.6 | max 0.1 | 0.1 - 0.25 | max 0.05 | 86.3 - 91.5 | 1.4 - 2 | 1.8 - 2.8 | 5 - 7 | other, each 0.05; all 0.1 |
Mechanical Properties Under T=20°C for Grade V95 (B95)
| Assortment | Dimension (mm) | SB (MPa) | ST (MPa) | d5 (%) | y (%) | KCU (kJ/m²) | Heat Treatment |
|---|---|---|---|---|---|---|---|
| Pipe, GOST 18482-79 | - | 490-510 | 375-400 | 5-7 | - | - | - |
| Bar, GOST 21488-97 | - | 490-530 | 390-420 | 4-6 | - | - | Quenching and artificial aging |
| Bar, GOST 51834-2001 | - | 550-570 | 480-490 | 6 | - | - | Quenching and artificial aging |
| Band annealed, GOST 13726-97 | - | 245 | - | 10 | - | - | - |
| Profile annealed, GOST 8617-81 | - | 275 | - | 10 | - | - | - |
| Profile, GOST 8617-81 | - | 510-520 | 451-461 | 6 | - | - | - |
| Plate, GOST 17232-99 | - | 470-490 | 390-410 | 2-4 | - | - | Quenching and artificial aging |
Brinell Hardness for V95 (B95)
| HB 10-1 = 125 MPa |
| HB 10-1 = 150 MPa (Quenching, Ageing) |
Physical properties for grade V95 (B95)
| T | E 10⁻⁵ | a 10⁶ | I | r | C | R 10⁹ |
|---|---|---|---|---|---|---|
| Grade | (MPa) | 1/Grade | Watt/(m·Grade) | (kg/m³) | (J/(kg·Grade)) | (Ohm·m) |
| 20 | 0.74 | 2850 | ||||
| 100 | 23.2 |
Equivalent steels for grade V95 (B95)
Warning! Indicated both exact and nearest equivalents.
| USA | Germany (DIN, WNr) | Japan (JIS) | France (AFNOR) | England (BS) | European (EN) | Italy (UNI) | Poland (PN) | Czechia (CSN) | Austria (ONORM) | Switzerland (SNV) | Inter (ISO) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 7075 A97075 AA7075 | 3.4365 AlZnMgCu1.5 | 7075 | 7075 A-Z5GU | 7075 L95 L96 | ENAW-7075 ENAW-AlZn5.5MgCu | AiZn5.8MgCuCr P-AiZn5.8MgCuCr | AlZn6Mg2Cu | 424222 | AlZn6Mg2Cu1.5 AlZnMgCu1.5 | AlZnMgCu | AlZn5.5MgCu AlZn6MgCu |
Specification:
Mechanical properties:
- sB - Tensile strength, [MPa]
- sT - Yield stress, [MPa]
- d5 - Specific elongation at fracture, [%]
- y - Reduction of area, [%]
- KCU - Impact strength, [kJ / m²]
- HB - Brinell hardness, [MPa]
Physical properties:
- T - Test temperature, [Grade]
- E - Young modulus, [MPa]
- a - Coefficient of linear expansion (range 20° - T), [1/Grade]
- l - Thermal (heat) condition coefficient, [Watt/(m·Grade)]
- r - Density, [kg/m³]
- C - Specific heat (range 20° - T), [J/(kg·Grade)]
- R - Electrical resistance, [Ohm·m]
V65 ( B65 ) - Aluminium wrought alloys: chemical composition, mechanical and physical properties, hardness
Database of steels and alloys (Marochnik) contains information about chemical composition and properties of more than 3000 steels and alloys.