BT5 / VT5 & VT5-1 / ВТ5-1 Titanium Alloys
Russian Metals supplies BT5 / VT5 / ВТ5 and BT5-1 / VT5-1 / ВТ5-1 Titanium Alloys for semi-finished products, welded parts, structural components, aerospace parts, formed products and heat-resistant titanium applications.
These Russian titanium alloy grades are used where low density, corrosion resistance, strength, weldability and stable performance are required in fabricated, machined, stamped and forged components.
Click any heading below to directly scroll to that section.
Keyword Variation Note
BT5 Titanium Alloy is often used as a GOST Latin-style name, while VT5 Titanium Alloy is commonly used as the English transliteration of the Russian grade ВТ5 Titanium Alloy.
BT5-1 Titanium Alloy and VT5-1 Titanium Alloy refer to the Russian grade ВТ5-1 Titanium Alloy. Both naming styles may appear in technical enquiries, product searches and older material references. For supply, the final grade should always be verified by Russian grade name, chemical composition, MTC and project specification.
Important Grade Confusion Note
Russian BT5 / VT5 / ВТ5 should not be confused with ASTM Titanium Grade 5 / Ti-6Al-4V unless the material certificate confirms the exact chemistry and standard. VT5 / ВТ5 is a Russian titanium grade with its own composition and specification route, while ASTM Grade 5 is commonly known as Ti-6Al-4V.
Russian Grade Name and Product Name
| English Keyword | Russian Grade | Russian Product Name | Common Product Type |
|---|---|---|---|
| BT5 Titanium Alloy | ВТ5 | Титановый сплав ВТ5 | Titanium wrought alloy |
| VT5 Titanium Alloy | ВТ5 | Титановый сплав ВТ5 | Sheet, plate, bar, rod, forging |
| BT5-1 Titanium Alloy | ВТ5-1 | Титановый сплав ВТ5-1 | Ti-Al-Sn titanium alloy |
| VT5-1 Titanium Alloy | ВТ5-1 | Титановый сплав ВТ5-1 | Sheet, strip, tube, wire, stamping, forging |
Material Overview
BT5 / VT5 / ВТ5 and BT5-1 / VT5-1 / ВТ5-1 are Russian titanium alloy grades known for corrosion resistance, low density, useful mechanical strength and performance in welded or formed components.
VT5 is mainly an aluminium-alloyed titanium grade used for bars, rods, sheets, plates, profiles, tubes, forgings and welded parts. VT5-1 is a Ti-Al-Sn titanium alloy used for semi-finished products, stamped parts, welded assemblies and components requiring medium strength, corrosion resistance and heat-resistant performance.
Grade Classification
| Grade | Russian Name | Classification | Main Performance Focus |
|---|---|---|---|
| BT5 | ВТ5 | GOST Latin-style / search variation | Corrosion resistance, weldability and titanium semi-finished products |
| VT5 | ВТ5 | Titanium wrought alloy | Welded parts, bars, rods, structural parts |
| BT5-1 | ВТ5-1 | GOST Latin-style / search variation | Ti-Al-Sn medium-strength titanium alloy |
| VT5-1 | ВТ5-1 | Titanium wrought alloy | Stamped parts, welded parts, sheets, plates, wire and forgings |
BT5 / VT5 / ВТ5 Titanium Alloy Overview
BT5 / VT5 / ВТ5 Titanium Alloy is a Russian titanium wrought alloy used for semi-finished products, welded parts, aircraft control system parts, fuselage internal parts, bars, rods, sheets, plates, strips, foils, tubes, profiles, forgings and forged blanks.
This grade is commonly searched as BT5 Russian Titanium, VT5 Russian Titanium Alloy, VT5 Titanium Wrought Alloy, VT5 High Corrosion Resistant Titanium, VT5 Heat Resistant Titanium Alloy, VT5 Aerospace Titanium Alloy, VT5 Titanium Bar, VT5 Titanium Rod, VT5 Titanium Sheet and VT5 Titanium Plate.
BT5-1 / VT5-1 / ВТ5-1 Titanium Alloy Overview
BT5-1 / VT5-1 / ВТ5-1 Titanium Alloy is a Russian Ti-Al-Sn titanium alloy used for semi-finished products, stamped parts, welded parts, shaped components, aerospace parts, tubes, profiles, wire, forgings and components working in cryogenic or elevated-temperature service.
This grade is searched as BT5-1 Russian Titanium, VT5-1 Russian Titanium, VT5-1 Titanium Wrought Alloy, VT5-1 Ti-Al-Sn Titanium Alloy, VT5-1 Medium Strength Titanium Alloy, VT5-1 Heat Resistant Titanium Alloy, VT5-1 Corrosion Resistant Titanium Alloy, VT5-1 5Al-2.5Sn Titanium Alloy and VT5-1 Grade 6 Titanium Equivalent.
Difference Between VT5 / ВТ5 and VT5-1 / ВТ5-1
| Point | VT5 / ВТ5 | VT5-1 / ВТ5-1 |
|---|---|---|
| Alloy System | Mainly Ti-Al with controlled Mo and V limits | Ti-Al-Sn titanium alloy |
| Tin Content | Not a main alloying element | Contains tin, typically around 2–3% |
| Strength Level | Useful strength for bars, rods and welded parts | Medium-strength titanium alloy |
| Product Focus | Bars, rods, sheets, plates, forgings and welded parts | Sheets, plates, strips, tubes, profiles, wire, stampings and forgings |
| Heat Resistance | Long service up to around 400°C depending on condition | Service up to around 450°C depending on condition |
| Weldability | Listed as weldable without restrictions | Listed as weldable without restrictions |
| Equivalent Note | No direct ASTM Grade 5 assumption | Often cross-referenced with 5Al-2.5Sn / Grade 6 style chemistry, verify by MTC |
Available Product Forms
| Product Form | VT5 / ВТ5 | VT5-1 / ВТ5-1 | Common Use |
|---|---|---|---|
| Sheet | Available | Available | Forming, fabrication, welded parts |
| Strip | Available | Available | Thin-gauge fabrication and formed parts |
| Foil | Available where applicable | Available where applicable | Thin-gauge titanium applications |
| Plate | Available | Available | Machined parts and structural sections |
| Bar | Available | Available | Shafts, pins, fastener stock and machined components |
| Rod | Available | Available | CNC parts and precision machining |
| Profile | Available | Available | Shaped aerospace and structural sections |
| Tube | Available | Available | Fabricated assemblies and industrial parts |
| Forging | Available | Available | Load-bearing and high-strength parts |
| Forged Blank | Available | Available | Semi-finished parts before machining |
| Stamping | Project-specific | Available | Stamped components and formed parts |
| Billet | Available | Available | Rolling, forging and machining |
| Wire | Project-specific | Available | Forming, fabrication and special components |
| Machined Blank | Available | Available | CNC-ready custom components |
VT5 / ВТ5 Product Specification Table
| Specification Point | VT5 / ВТ5 Details |
|---|---|
| Grade Name | BT5 / VT5 / ВТ5 |
| Russian Product Name | Титановый сплав ВТ5 |
| Alloy Type | Titanium wrought alloy |
| Main Alloy System | Ti-Al with controlled Mo and V limits |
| Aluminium Content | Approx. 4.5–6.2% |
| Common Forms | Sheet, strip, foil, plate, bar, rod, profile, tube, forging, billet |
| Typical Use | Welded parts, aircraft control systems, fuselage internal parts, semi-finished products |
| Heat Resistance | Long service up to around 400°C depending on condition |
| Weldability | Weldable without restrictions as listed in material data |
| Equivalent Note | Do not confuse with ASTM Grade 5 / Ti-6Al-4V |
| Certification | MTC, chemical analysis, mechanical testing and traceability |
VT5-1 / ВТ5-1 Product Specification Table
| Specification Point | VT5-1 / ВТ5-1 Details |
|---|---|
| Grade Name | BT5-1 / VT5-1 / ВТ5-1 |
| Russian Product Name | Титановый сплав ВТ5-1 |
| Alloy Type | Titanium wrought alloy |
| Main Alloy System | Ti-Al-Sn |
| Aluminium Content | Approx. 4.3–6.0% |
| Tin Content | Approx. 2.0–3.0% |
| Common Forms | Sheet, strip, foil, plate, bar, rod, tube, wire, forging, stamping |
| Typical Use | Stamped parts, welded parts, cryogenic applications, semi-finished products |
| Heat Resistance | Service up to around 450°C depending on condition |
| Heat Treatment Note | Commonly described as not thermally hardened |
| Equivalent Note | Often cross-referenced with 5Al-2.5Sn / Grade 6 style chemistry |
| Certification | MTC, material certificate, mechanical testing and heat number traceability |
Product Form Details
VT5 / ВТ5 and VT5-1 / ВТ5-1 Titanium Sheet
VT5 and VT5-1 titanium sheets are used for forming, fabrication, welded parts, aircraft internal structures and structural components. Sheets can be supplied in custom thickness, width, length and surface condition.
VT5 / ВТ5 and VT5-1 / ВТ5-1 Titanium Strip
Titanium strip is used for thin-gauge fabrication, formed parts, precision applications and lightweight titanium components requiring controlled thickness and surface quality.
VT5 / ВТ5 and VT5-1 / ВТ5-1 Titanium Foil
Foil may be supplied for thin-gauge titanium applications where lightweight performance, corrosion resistance and controlled gauge are required.
VT5 / ВТ5 and VT5-1 / ВТ5-1 Titanium Plate
Titanium plate is used for machined parts, structural sections, fabricated components and high-strength engineering applications. Plate can be supplied cut-to-size or as machined blanks.
VT5 / ВТ5 and VT5-1 / ВТ5-1 Titanium Bar
Titanium bar is used for turning, machining, shafts, pins, fastener stock and engineered components requiring reliable titanium alloy performance.
VT5 / ВТ5 and VT5-1 / ВТ5-1 Titanium Rod
Titanium rod is suitable for precision machining, CNC components, fabricated parts and custom titanium alloy applications.
VT5 / ВТ5 and VT5-1 / ВТ5-1 Titanium Profile
Titanium profiles are used for shaped sections, aerospace parts, structural applications and custom engineering requirements.
VT5 / ВТ5 and VT5-1 / ВТ5-1 Titanium Tube
Titanium tubes are used for fabricated assemblies, welded parts, industrial components and corrosion-resistant systems.
VT5 / ВТ5 and VT5-1 / ВТ5-1 Titanium Forging
Titanium forgings are supplied for high-strength, load-bearing and aerospace-type components that require strong mechanical performance.
VT5 / ВТ5 and VT5-1 / ВТ5-1 Forged Blank
Forged blanks are semi-finished titanium parts supplied before final machining. They are suitable for CNC machining, structural components and custom manufacturing.
VT5-1 / ВТ5-1 Titanium Stamping
VT5-1 titanium stamping products are used for formed parts, semi-finished components, aircraft structures and precision fabricated components.
VT5-1 / ВТ5-1 Titanium Wire
VT5-1 titanium wire can be supplied for forming, fabrication, special component production and titanium alloy applications requiring controlled diameter and surface finish.
VT5 / ВТ5 and VT5-1 / ВТ5-1 Machined Blank
Machined blanks are CNC-ready titanium alloy pieces prepared for milling, turning, drilling, grinding and final component production.
Surface Condition and Finish Options
| Product Type | Surface / Finish Options |
|---|---|
| Sheet and Strip | Bright, pickled, polished, ground, clean finish |
| Plate | Black, pickled, ground, machined, sand-blasted |
| Bar and Rod | Black, bright, peeled, polished, ground, machined |
| Tube and Profile | Pickled, polished, machined, clean finish |
| Forging and Forged Blank | Black, machined, ground, shot-blasted |
| Stamping | Clean, pickled, formed or project-specific finish |
| Wire | Bright, clean, pickled or project-specific finish |
| Machined Blank | Machined, ground, polished or custom finish |
Dimensional Range Overview
| Product Form | Common Dimensional Details |
|---|---|
| Sheet | Thickness, width and length as per project requirement |
| Strip | Controlled thickness and width, coil or cut-length options |
| Foil | Thin-gauge availability where applicable |
| Plate | Medium to heavy thickness for machining and structural use |
| Bar | Diameter and length according to machining requirement |
| Rod | Precision diameter and cut-length options |
| Profile | Shape, section and length based on drawing |
| Tube | Outside diameter, wall thickness and length as per requirement |
| Forging | Drawing-based forged shape, section and weight |
| Forged Blank | Semi-finished size with machining allowance |
| Stamping | Project-based shape, thickness and tolerance |
| Billet | Diameter, length and cut size as per forging or machining need |
| Wire | Diameter, coil, spool or cut-length requirement |
| Machined Blank | Custom size, tolerance and finish based on drawing |
Chemical Composition Overview
VT5 / ВТ5 and VT5-1 / ВТ5-1 are titanium alloys mainly based on titanium with aluminium. VT5 contains controlled molybdenum and vanadium limits, while VT5-1 contains aluminium and tin as key alloying elements.
VT5 / ВТ5 Chemical Composition
| Element | Typical Range / Limit |
|---|---|
| Titanium | Balance, approx. 90.63–95.20% |
| Aluminium | 4.5–6.2% |
| Vanadium | Max 1.2% |
| Molybdenum | Max 0.8% |
| Zirconium | Max 0.30% |
| Iron | Max 0.30% |
| Silicon | Max 0.12% |
| Carbon | Max 0.10% |
| Nitrogen | Max 0.05% |
| Oxygen | Max 0.20% |
| Hydrogen | Max 0.015% |
| Other Impurities | Max 0.30% |
VT5-1 / ВТ5-1 Chemical Composition
| Element | Typical Range / Limit |
|---|---|
| Titanium | Balance, approx. 88.83–93.40% |
| Aluminium | 4.3–6.0% |
| Tin | 2.0–3.0% |
| Vanadium | Max 1.0% |
| Zirconium | Max 0.30% |
| Iron | Max 0.30% |
| Silicon | Max 0.12% |
| Carbon | Max 0.10% |
| Nitrogen | Max 0.05% |
| Oxygen | Max 0.15% |
| Hydrogen | Max 0.015% |
| Other Impurities | Max 0.30% |
Role of Alloying Elements
Titanium Balance
Titanium is the base element in VT5 / ВТ5 and VT5-1 / ВТ5-1. It provides low density, corrosion resistance and a strong foundation for titanium alloy performance.
Aluminium
Aluminium increases strength, elastic modulus, heat resistance and specific strength in titanium alloys. It is the main alloying element in both VT5 and VT5-1.
Tin in VT5-1 / ВТ5-1
Tin helps improve technological properties, oxidation resistance and creep resistance in VT5-1 titanium alloy. It also supports the Ti-Al-Sn alloy system used in medium-strength titanium applications.
Vanadium
Vanadium is controlled in these Russian titanium alloys and supports mechanical performance where present within the grade limit.
Molybdenum in VT5 / ВТ5
Molybdenum is controlled in VT5 composition and supports alloy strengthening, stability and mechanical performance.
Controlled Impurities
| Controlled Element | Importance |
|---|---|
| Carbon | Controlled to maintain titanium alloy quality |
| Silicon | Limited for grade consistency |
| Iron | Controlled for mechanical performance and chemistry balance |
| Nitrogen | Controlled because it affects titanium alloy properties |
| Oxygen | Controlled for strength, ductility and performance |
| Hydrogen | Controlled because hydrogen can affect titanium quality |
| Other Impurities | Limited for grade consistency and MTC compliance |
Mechanical Properties
| Grade | Product Form / Condition | Tensile Strength | Elongation | Reduction of Area | Impact Toughness | Hardness |
|---|---|---|---|---|---|---|
| VT5 / ВТ5 | Bar, annealed | Approx. 685–735 MPa | 6–8% | 15–20% | Approx. 300 kJ/m² | HB 229–321 |
| VT5 / ВТ5 | Bar, annealed / GOST 26492-85 | Approx. 715–930 MPa | 6–10% | 18–25% | Approx. 300–500 kJ/m² | HB 229–321 |
| VT5-1 / ВТ5-1 | Sheet, annealed | Approx. 735 MPa | 8–15% | As per MTC | As per MTC | HB 241–321 |
| VT5-1 / ВТ5-1 | Bar, annealed | Approx. 745–785 MPa | 6–8% | 15–20% | Approx. 400 kJ/m² | HB 241–321 |
| VT5-1 / ВТ5-1 | Bar, annealed / GOST 26492-85 | Approx. 745–980 MPa | 6–10% | 18–25% | Approx. 400–450 kJ/m² | HB 241–321 |
| VT5-1 / ВТ5-1 | Plate, 11–35 mm | Approx. 735–930 MPa | Min. 6% | Approx. 12% | As per MTC | HB 241–321 |
Tensile Strength
Tensile strength is important for VT5 and VT5-1 titanium alloys because it shows how much load the material can carry before fracture. This matters for sheets, plates, bars, rods, forgings, welded assemblies and stamped parts.
Elongation and Ductility
Elongation and ductility help determine how the alloy performs during forming, stamping, welding, machining and service. VT5-1 offers useful ductility in sheet, bar and plate forms, while VT5 supports welded and machined titanium components.
Hardness
Hardness values are useful for machining control, finished product performance and inspection. VT5 / ВТ5 is listed with Brinell hardness around HB 229–321, while VT5-1 / ВТ5-1 is listed around HB 241–321.
Density
VT5 / ВТ5 has listed density around 4400 kg/m³, while VT5-1 / ВТ5-1 has listed density around 4425 kg/m³. This low density helps reduce weight compared with many steel alloys.
Heat Resistance
VT5 / ВТ5 is commonly used for long service up to around +400°C, depending on product form, heat treatment and service conditions.
VT5-1 / ВТ5-1 is used for applications up to around +450°C, depending on material condition, component design and project requirement.
Cryogenic Temperature Performance
VT5 / ВТ5 and selected low-impurity VT5-1 / ВТ5-1 variants may be used in low-temperature or cryogenic applications where titanium’s strength-to-weight ratio and corrosion resistance are required. Final suitability should be confirmed through specification, MTC and service design.
Corrosion Resistance
Titanium’s natural corrosion resistance makes VT5 / ВТ5 and VT5-1 / ВТ5-1 suitable for aerospace, industrial, marine, chemical, fabricated and welded environments.
Weldability
VT5 / ВТ5 and VT5-1 / ВТ5-1 are listed with weldability without restrictions in referenced material data. This makes them useful for welded parts, welded assemblies, fabricated components and aircraft internal structures.
Machinability, Formability and Heat Treatment
VT5 and VT5-1 can be processed through cutting, turning, milling, drilling, grinding, CNC machining, rolling, forging, stamping and forming. Proper titanium tooling, coolant and temperature control are recommended.
VT5-1 is commonly described as not thermally hardened, so material condition is usually controlled through processing, annealing and product form rather than conventional hardening response.
Applications of BT5 / VT5 / ВТ5 and BT5-1 / VT5-1 / ВТ5-1
| Application | Suitable Grade |
|---|---|
| Welded parts and assemblies | VT5 / ВТ5, VT5-1 / ВТ5-1 |
| Aircraft control system parts | VT5 / ВТ5 |
| Fuselage internal parts | VT5 / ВТ5 |
| Aircraft internal structures | VT5 / ВТ5, VT5-1 / ВТ5-1 |
| Cryogenic applications | VT5 / ВТ5, selected VT5-1 / ВТ5-1 variants |
| High-temperature service | VT5 / ВТ5, VT5-1 / ВТ5-1 |
| Semi-finished products | VT5 / ВТ5, VT5-1 / ВТ5-1 |
| Shaped castings / formed components | VT5-1 / ВТ5-1 |
| Sheets and plates | VT5 / ВТ5, VT5-1 / ВТ5-1 |
| Bars and rods | VT5 / ВТ5, VT5-1 / ВТ5-1 |
| Tubes and profiles | VT5 / ВТ5, VT5-1 / ВТ5-1 |
| Forgings and forged blanks | VT5 / ВТ5, VT5-1 / ВТ5-1 |
| Stamped parts | VT5-1 / ВТ5-1 |
| Machined blanks | VT5 / ВТ5, VT5-1 / ВТ5-1 |
Testing, Certification and Packaging
Russian Metals supplies BT5 / VT5 / ВТ5 and BT5-1 / VT5-1 / ВТ5-1 titanium alloy materials with documentation and export-ready packaging based on project requirement.
| Testing / Certification Point | Details |
|---|---|
| Chemical Analysis | Confirms Ti, Al, Sn where applicable, and controlled impurities |
| Mechanical Testing | Tensile strength, elongation, reduction of area and impact toughness where required |
| Hardness Testing | Available for bars, plates, forgings and machined blanks |
| Ultrasonic Testing | Available for selected plates, bars, billets and forgings |
| PMI Testing | Positive material identification where required |
| Dimensional Inspection | Diameter, thickness, width, length and tolerance checks |
| Material Certificate | MTC with heat number and grade traceability |
| Heat Number | Heat-level material tracking |
| Batch Traceability | Batch identification from supply to packing |
| Grade Marking | BT5 / VT5 / ВТ5 or BT5-1 / VT5-1 / ВТ5-1 marking where applicable |
| Export Packaging | Wooden box, bundle packing, wrapped protection or project-specific packing |
Grade Comparison Table
| Grade | Russian Name | Alloy System | Key Benefit | Common Product Forms | Typical Application |
|---|---|---|---|---|---|
| BT5 | ВТ5 | Ti-Al with controlled Mo/V limits | Search and GOST Latin-style naming | Bar, rod, sheet, plate, forging | Welded parts and semi-finished products |
| VT5 | ВТ5 | Ti-Al with controlled Mo/V limits | Corrosion resistance and weldability | Bar, rod, sheet, plate, tube, profile | Aircraft internal parts and welded assemblies |
| BT5-1 | ВТ5-1 | Ti-Al-Sn | Search and GOST Latin-style naming | Sheet, plate, tube, wire, stamping | Stamped and welded titanium parts |
| VT5-1 | ВТ5-1 | Ti-Al-Sn | Medium strength and heat resistance | Sheet, strip, plate, bar, rod, forging | Aerospace, cryogenic and elevated-temperature components |
Equivalent Grade Note
VT5 / ВТ5 should not be treated as ASTM Grade 5 / Ti-6Al-4V unless the certificate and project standard confirm it.
VT5-1 / ВТ5-1 is often cross-referenced with 5Al-2.5Sn / Grade 6 titanium-style chemistry, but the final material selection should always be confirmed by Russian grade name, chemical composition, mechanical properties, standard and MTC.
FAQs
What is BT5 titanium alloy?
▾
BT5 titanium alloy is a GOST Latin-style or search variation for the Russian titanium grade ВТ5. In English transliteration, it is commonly written as VT5 Titanium Alloy.
Is BT5 the same as VT5?
▾
Yes, BT5 and VT5 generally refer to the same Russian grade family ВТ5, but the grade should always be confirmed through MTC and chemical composition.
What is the Russian name of VT5?
▾
The Russian grade name of VT5 is ВТ5.
What is ВТ5 titanium alloy used for?
▾
ВТ5 titanium alloy is used for welded parts, aircraft control system parts, fuselage internal parts, semi-finished products, bars, rods, sheets, plates, tubes, profiles and forgings.
Is BT5 / VT5 the same as ASTM Grade 5 titanium?
▾
No, Russian BT5 / VT5 / ВТ5 should not be assumed to be ASTM Grade 5 / Ti-6Al-4V. The material must be checked by certificate and chemical composition.
What is BT5-1 titanium alloy?
▾
BT5-1 titanium alloy is a search or GOST Latin-style name for the Russian grade ВТ5-1, also written as VT5-1 Titanium Alloy.
Is BT5-1 the same as VT5-1?
▾
Yes, BT5-1 and VT5-1 generally refer to the same Russian grade ВТ5-1.
What is the Russian name of VT5-1?
▾
The Russian grade name of VT5-1 is ВТ5-1.
What is the difference between VT5 and VT5-1?
▾
VT5 / ВТ5 is mainly an aluminium-alloyed titanium grade, while VT5-1 / ВТ5-1 contains aluminium and tin. Tin helps improve technological, oxidation and heat-resistant properties.
What is the chemical composition of VT5?
▾
VT5 / ВТ5 contains titanium balance with approximately 4.5–6.2% aluminium, controlled molybdenum and vanadium limits, plus controlled impurities.
What is the chemical composition of VT5-1?
▾
VT5-1 / ВТ5-1 contains titanium balance with approximately 4.3–6.0% aluminium and 2.0–3.0% tin, plus controlled impurity limits.
What are the mechanical properties of VT5-1?
▾
VT5-1 / ВТ5-1 mechanical properties depend on product form and condition. Typical listed values include tensile strength around 735 MPa for annealed sheet and around 745–980 MPa for annealed bar condition.
Is VT5-1 equivalent to 5Al-2.5Sn / Grade 6 titanium?
▾
VT5-1 / ВТ5-1 is often cross-referenced with 5Al-2.5Sn / Grade 6 style titanium chemistry, but final equivalence should be confirmed by project standard, chemical composition and MTC.
What product forms are available in BT5 / VT5 / BT5-1 / VT5-1?
▾
Russian Metals supplies these grades in sheet, strip, foil, plate, bar, rod, profile, tube, forging, forged blank, stamping, billet, wire and machined blank forms.
Are VT5 and VT5-1 suitable for welded parts?
▾
Yes, both VT5 / ВТ5 and VT5-1 / ВТ5-1 are listed with weldability without restrictions, making them suitable for welded parts and fabricated titanium assemblies.
BT5 / VT5 / ВТ5 & BT5-1 / VT5-1 / ВТ5-1 Titanium Alloys
Send the required alloy designation, product form, dimensions, quantity, standard, delivery condition, testing, certificate requirements and destination for a technically correct quotation.
Russian Metals supplies BT5 / VT5 / ВТ5 and BT5-1 / VT5-1 / ВТ5-1 Titanium Alloys for semi-finished products, welded parts, structural components, aerospace parts, formed products and heat-resistant titanium applications.
Chemical, mechanical, heat-treatment and inspection documentation.
Product-form, cut-to-size, forging and drawing-based supply support.
Export packaging and international delivery assistance.