- Flat 20, Reynolds USA
- +812 555 33 44
Mon - Fri: 9:00 - 19:00
Russian Metals
PT-1M
Characteristics of the material
| Brand : | PT-1M |
| Classification : | Titanium wrought alloy |
| Application: | for the production of ingots and semi-finished products, cold-formed pipes, special-purpose aircraft and instrument-making parts. |
| Foreign analogues: | No data |
Chemical composition in % of PT-1M material
GOST-1 92077 - 91
| Fe | C | Si | N | You | Al | Zr | O | Impurities |
|---|---|---|---|---|---|---|---|---|
| up to 0.2 | up to 0.07 | up to 0.1 | up to 0.04 | 98.29 - 99.5 | 0.2 - 0.7 | up to 0.3 | up to 0.12 | other 0.3 |
Note: Ti is the basis; Ti percentage is approximate.
Designations:
Mechanical properties :
σin - Tensile strength [MPa]
σT - Yield stress [MPa]
δ5 - Specific elongation at fracture [%]
ψ - Reduction of area [%]
KCU - Impact strength [kJ/m²]
HB - Brinell hardness [MPa]
Physical properties :
T - Test temperature [Grade]
E - Young modulus [MPa]
α - Coefficient of linear expansion (20° - T) [1/Grade]
λ - Thermal (heat) condition coefficient [Watt/(m·Grade)]
ρ - Density [kg/m³]
C - Specific heat (range 20° - T) [J/(kg·Grade)]
R - Electrical resistance [Ohm·m]
PT-1M - Titanium deformable alloy
- PT-1M - chemical composition, mechanical, physical and technological properties, density, hardness, application
- When using the information from the site, a hyperlink to "Grade book of steel and alloys (www.splav-kharkov.com)" is required on each page.