Mon - Fri: 9:00 - 19:00

AMG5

Characteristics for grade АMg5 ( АМг5 )

Grade :АMg5 ( АМг5 ) ( 1550 )
Classification : Aluminium wrought alloys
Equivalent grades:Go here

Chemical composition in % for grade АMg5 ( АМг5 )

Fe Si Mn Ti Al Cu Be Mg Zn Impurity
max 0.5 0.3 - 0.8 0.02 - 0.1 91.9 - 94.68 max 0.10.0002 - 0.005 4.8 - 5.8 max 0.2 other, each 0.05; all 0.1

Mechanical properties under Т=20oС for grade АMg5 ( АМг5 )

Mechanical properties under T=20°C for grade AMg5 (AMr5)
AssortmentDimension (mm)Direct.σB (MPa)σT (MPa)δ (%)ψ (%)KCU (kJ/m²)Heat treatment
Pipe, GOST 18482-79--25511015---
Bar, GOST 21488-97--245-265110-12010-15---
Band, GOST 13726-97--27513012-15---
Profile, GOST 8617-81--25517515---
Plate , GOST 17232-99--255-265110-12012-13---
Brinell hardness for AMg5 (AMr5), HB 10 -1 = 45 MPa
Brinell hardness for AMg5 (AMr5) (cold-worked), HB 10 -1 = 60 MPa
Weldability: without limitations.
Physical properties for grade АMg5 ( АМг5 )
TE 10⁵α 10⁶λρCR 10⁹
GradeMPa1/GradeWatt/(m·Grade)kg/m³J/(kg·Grade)Ohm·m
20266049.6
100126922
Equivalent steels for grade AMg5 (AMr5)

Warning! Indicated both exact and nearest equivalents.

USAGermanyJapan
-DIN, WNrJIS
AA50563.3555 AlMg55056
Types of delivery of grade AMg5 (AMr5)

B51 - Non-ferrous metals, including rare metals, and their alloys

B52 - Graded and shaped rolling

B53 - Sheets and Strips

B54 - Ribbons

B55 - Bars

B64 - Pipes of non-ferrous metals and alloys

Mechanical properties :

σB - Tensile strength [MPa]

σT - Yield stress [MPa]

δ5 - Specific elongation at fracture [%]

ψ - Reduction of area [%]

KCU - Impact strength [kJ/m²]

HB - Brinell hardness [MPa]

Physical properties :

T - Test temperature [Grade]

E - Young modulus [MPa]

α - Coefficient of linear expansion (20° - T) [1/Grade]

λ - Thermal (heat) condition coefficient [Watt/(m·Grade)]

ρ - Density [kg/m³]

C - Specific heat (range 20° - T) [J/(kg·Grade)]

R - Electrical resistance [Ohm·m]

0